'TYPE X' Tail light install on the
DriftGirl Project 180


Remove interior panels



Un-bolt center garnish
From there you can put in the 180sx Garnish
or go all the way like we have....
 

Remove Tail lights and trim piece that goes under both

Remove Lock to install JDM Version.  Notice the JDM lock is longer



Remove tail lights (they're pretty hard to remove because of the adhesive!)

Splice USDM wire harnesses into the JDM Tail light harness*

Install JDM Tails, plug harnesses back in and test for proper working condition

If everything is working ok....
Solder wires together and use a heat sleeve!

Sell USDM Lights on Ebay =o)

Done!

*IT'S JDM TYTE YO!!!!!!!!!